|
| |
ST-3003 Series Ethernet Andon Displays
|
ST-3003-245 3-point Ethernet Andon |
The ST-3003-24X models provide
LED illuminated light blocks and two silicon-relay AC outputs that may be
controlled from any intelligent control system capable of sending ASCII
commands over a TCP/IP communications link. Each of the light blocks and
both the AC outputs can be set to off; on; blink fast; blink medium; or
blink slow states independently of each other. The AC relay outputs are
provided to allow the customer to connect add-ons such as audible alarms or
rotating beacons and control them from the Ethernet. |
|
Available Models |
Model # |
|
Standard 3-point models are: red-yellow-green
|
ST-3003-245 |
|
Standard 5-point models are: red-yellow-green-blue-white-orange.
|
ST-3003-246 |
| AC Supply Voltage |
115/130 Vac, 50/60 Hz |
| Operating Temperature |
0 C to 50 C |
| Enclosure |
NEMA 1 black extruded aluminum |
| Dimensions |
22.1875” wide by 6.0” tall by 3.5” deep |
| Character Generation |
LED’s in red,yellow, green |
| LED Life |
100,000 hours ( 11.4 years ) |
| Communications |
Ethernet 10/100bT TCP/IP pc controlled |
| Outputs |
Two Solid State 120-240VAC outputs |
Additional Details:
|
Each Ethernet Andon has its MAC address printed on the
bottom of the unit to make it easy for your IT staff to reserve the
necessary IP address in your DHCP server. No special configuration tools or
software is required to provision the Ethernet Andon on your network. |
|
The Ethernet Andon provides an industry standard power entry
module, and supports both 120VAC and 240VAC power at both 50Hz and 60Hz. A
standard American 120VAC six foot power cord is provided with the unit. |
|
The rugged black anodized aluminum enclosure is designed to
be mounted to any wall or other permanent vertical structure using the wall
mount tabs on the left and right sides of the enclosure. |
|
